AntMiner T9 ~11.5TH/s @ 0.126W/GH 16nm ASIC Bitcoin Miner, not available now

0.00 $

Hash Rate: 11.5TH/s (±7% is expected).
Power Consumption: 1450W (±10%) at the wall (with Bitmain’s APW3 PSU, 93 percent efficiency, 25C ambient temp).
Power Efficiency: 0.126 J/GH at the wall (with Bitmain’s APW3 PSU).
Noise level: Loud. Not for desk-top use. Sounds like a vacuum.
Chip quantity per unit: 171 x BM1387.
Rated Voltage: 11.60 ~13.00V.
Operating Temperature: 0C to 40C.
Network Connection: Ethernet (cable not included).

Notes:
1. Due to the nature of these products, there are higher than normal restocking fees (typically 30-40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a return.
2. Each AntMiner T9 requires TEN 6-pin PCI-e connectors for 12V DC input (must be very stable power source) There are three hash boards that require three 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller. All TEN 6-pin PCI-e connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability.
3. Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.
4. Power supply unit is not included. Bitmain recommends the APW3 or the APW5 power supply for the AntMiner T9.

Out of stock

Description

AntMiner T9 11.5THs 0.126W GH 16nm ASIC Bitcoin Miner

The BM1387 ASIC Chip

The world’s first bitcoin mining ASIC based on the 16nm process node

Bitmain’s BM1387 chip is built using TSMC’s 16nm FinFET technology and is the world’s most efficient bitcoin mining chip in the consumer market.

Each An

tminer T9 employs 171 such chips to deliver a stability and efficiency combination not found in any other Bitcoin miner in existence.

A Compact Time-tested Design

World’s most powerful bitcoin miner, yet smaller than many portable boom-boxes

The Antminer T9 follows the same form factor as that of the hugely popular Antminer S9 and is also the same size.

Whether in a home or in a mining farm with several other T9 miners, Antminer T9’s small footprint makes it comfortable in all locations.

1. Controlled by a Dual ARM® Cortex®-A9 Microprocessor

T9’s control board uses a Xilinx® Zynq®-7000 series FPGA with a Dual ARM® Cortex®-A9 microprocessor

 AntMiner T9 11.5THs 0.126W GH 16nm ASIC Bitcoin Miner LETI ELECTRONICS HK

 Bitmain’s engineering team understood the importance of every detail while working to make a highly stable yet efficient Bitcoin miner. The Antminer T9’s control board employs the fast Dual ARM® Cortex®-A9 microprocessor with 

CoreSight™ and supports Gigabit Ethernet to ensure that mined blocks are submitted instantly.

 

Engineered to Remain Powerful Yet Cool

A high-grade aluminum case, customized heat-sinks and two computer-controlled fans to keep it cool

 

The T9 utilizes a combination of conduction and convection cooling to make the world’s most powerful miner perform best without getting hotter than any other terahash bitcoin miner.

Every chip of the T9 is fitted with custom-made heat sinks that are made of a high-grade aluminum alloy. The case of the T9 is made of the same material. Two computer-controlled high speed fans on both ends of the “tube” ensure that the hot air is rapidly replaced by cooler air at the required pace.

Ease of Use

Antminer T9’s user interface has been carefully designed keeping in mind the needs of its users

After you have accessed the Antminer’s user interface, all you have to do is to enter your wallet address and mining pool settings before you start mining. The user interface also allows you to customize settings such as the fan speed or the frequency and can be upgraded to new releases from Bitmain.

  • Hash Rate12.5TH/s. A variation of +/- 5% is expected.
  • Power Consumption1576W +7% (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temperature)
  • Power Efficiency0.126J/GH + 7% (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temperature)
  • DC Voltage Input11.60 ~ 13.00V
  • Chip TypeBM1387
  • Chip quantity per unit171 chips
  • Dimensions350mm(L) x 135mm(W) x 158mm(H)
  • CoolingTwo 12038 fans. Front fan: 6000RPM, rear fan: 4300RPM
  • Operating Temperature0°C to 40°C
  • Network ConnectionEthernet

Reviews

There are no reviews yet.

Be the first to review “AntMiner T9 ~11.5TH/s @ 0.126W/GH 16nm ASIC Bitcoin Miner, not available now”

Your email address will not be published. Required fields are marked *